Ultimate Jigging Aluminum T-Bar T092 Handle Knob (without Bearing) Shimano & Daiwa Model is special design for Butterfly jigging style fishing and other fishing style. It's made by same manufacture that makes aluminum products for well known butterfly jigging brand.

Suitable Reels for T092:

• Shimano Ocea Jigger 4000~5000P, 2004 SW Stella 10000~20000 FA (Shaft-S).
• Shimano 2013+ Saragosa SW 5000~25000, 2011+ Twinpower SW 8000~12000, 2008+ Stella SW 5000~20000 Spinning Reels, Tranx 500. (Shaft-NS - see Installation Tips 2)
• 2008 Shimano SW Twinpower 4000~12000 (Shaft-NS)
• Shimano new Talica 10, 12, 16, 20, 25 single speed and two speed reels (Shaft-NS - see Installation Tips 2 and 3) Talica 50 handle knob is riveted on arm and not removable. If you like to install on 50's Talica, drilling work will be needed.
• Shimano new Torsa 16N, 16, 20, 30 reels. (Shaft-NS - see Installation Tips 4)
• Shimano Saragosa 18000F reel (Shaft-S - see Installation Tip 5)
• Daiwa Saltiga-Z 20~40 (Shaft-D - see Installation Tips 1). And Directly change for Daiwa Catalog with Label 「L」
• Daiwa Saltiga-Z4000~6500 spinning reels. Catalina (Japan) 4000-4500, Seaborg series electrical reels. (Shaft-D - see installation Tips 1)
• Daiwa Saltiga/Saltist SA15-50, STTLD20-50, STTLW20-50. (Shaft-D - see Installation Tips 1)

Shaft and Bearings: (see below Tips)

• D Shaft - associates with two 8x5x2.5 Bearings
• NS Shaft - associates with one 9x5x3 Bearing and/or one 9x4x4 Bearing
• S Shaft - associates with need one 8x5x2.5 Bearing and one 9x4x4 Bearing

Installation Tips:

1. For Daiwa Reels, D Shaft Housing allows you to install T092 Handel with the original shaft and bearing/sleeve without modification, please make sure you remove all parts from original knob. This Ultimate Jigging T092 Handle Knob is precision made, no need any extra washer inside of housing. However, if there is any play after installed, you can use the original washer to adjust it.
2. NS Shaft Housing allows you to install T092 Handel with the original shaft and bearing/sleeve without modification. For new 2013+ Saragosa SW 5000~25000, 2011+ Twinpower SW 8000~12000, 2008+ Stella Reel 5000 - 20000 SW and Shimano new Talica 10, 12, 16, 20, 25 single speed and two speed reel, you need to use two Bearings or sleeves removed from your original knob to install in this T-Bar stainless shaft hosing, how you remove bearings from original knob is how you install back; but with this T-Bar instead of the original knob.
3. The latest version Talica comes with no bearings, you will need to get one 9x5x3 Bearing and one 9x4x4 Bearing to install the T092 Handle Knob.
4. For Shimano new Torsa 16N, 16, 20, and 30 Reels, you need to use one 9x5x3 Bearing removed from your original knob to install in this T-Bar NS stainless shaft hosing, how you remove bearings from original knob is how you install back; the new 9x4x4 Bearing which you purchase will replace original 8mm bearing. With Torsa Kit (You need purchase a 9mm Japanese bearing and a spacer provided by us) will fit directly to all Shimano new version of Torsa 16N-30. (Please see T-Bar T092ST: Torsa & Talica Model Handel Knob Package)
5. Saragosa 18000F reel only comes with one 9mm bearing inside of handle knob near end cap. To install, it needs with S Shaft housing with one 8mm Bearing and one S Spacer (near arm position) - You need purchase a 8mm Bearing, S Sapcer will send to you free.

Please see "T092 Handle Knob Upgrade Steps" for detail installation information. If you have any question of this product, please email us at support@pbmfishing.com to consult.

Features:

• Brand: Ultimate Jigging
• Machined from solid 6061-T6 Aluminum stock.
• Length: 98 mm Gradient:14 degrees,made of anti-rust stainless steel.
• S, NS and D type Stainless shafts housing with water proof O-Ring to prevent saltwater get into your knob bearing.
• Tilted T-Bar knob.
• Designed holes reduce weight to add unique looking and offer comfortable grip for anglers.
• Beautifully twice-anodic appearance.
• Bearings shall purchase at your cost. (However, you still can use the original bearings/sleeves remove from your knob to install it) 

Available Colors:

• Black/Gold.
• Black/Silver.
• Blue/Silver.
• Gold/Silver.
• Gunmetal/Gold.
• Gunmetal/Silver.
• Pale-Gold/Silver.
• Red/Silver.
• Silver.

Orders:

• Buy 1 piece for $68.50/each